Citation: Th. Hyde et al., Effect of weld angle and axial load on the creep failure behaviour of an internally pressurised thick walled CrMoV pipe weld, INT J PRES, 78(5), 2001, pp. 365-372
Authors:
Richardson, IJ
Hyde, TM
Becker, AA
Taylor, JW
Citation: Ij. Richardson et al., A three-dimensional finite element investigation of the bolt stresses in an aero-engine Curvic coupling under a blade release condition, P I MEC E G, 214(G4), 2000, pp. 231-245
Authors:
Leen, SB
Hyde, TR
Williams, EJ
Becker, AA
McColl, IR
Hyde, TH
Taylor, JW
Citation: Sb. Leen et al., Development of a representative test specimen for frictional contact in spline joint couplings, J STRAIN A, 35(6), 2000, pp. 521-544
Citation: Th. Hyde et al., Life assessment of weld repairs in (1)/Cr-2(1)/Mo-2(1)/V-4 main steam pipes using the finite element method, J STRAIN A, 35(5), 2000, pp. 359-372
Citation: W. Sun et al., Comparison of the creep and damage failure prediction of the new, service-aged and repaired thick-walled circumferential CrMoV pipe welds using material properties at 640 degrees C, INT J PRES, 77(7), 2000, pp. 389-398
Citation: Th. Hyde et al., Failure prediction for multi-material creep test specimens using a steady-state creep rupture stress, INT J MECH, 42(3), 2000, pp. 401-423
Citation: Jg. Leahy et Aa. Becker, A quadratic boundary element formulation for three-dimensional contact problems with friction, J STRAIN A, 34(4), 1999, pp. 235-251
Citation: Jg. Leahy et Aa. Becker, The numerical treatment of local variables in three-dimensional frictionalcontact problems using the boundary element method, COMPUT STRU, 71(4), 1999, pp. 383-395
Citation: Rs. Hack et Aa. Becker, Frictional contact analysis under tangential loading using a local axes boundary element formulation, INT J MECH, 41(4-5), 1999, pp. 419-436
Citation: L. Xia et al., An assessment of the C and K-I parameters for predicting creep crack growth in a Ni-base superalloy (Waspaloy) at 700 degrees C, INT J FRACT, 92(1), 1998, pp. 39-53