AAAAAA

   
Results: 1-10 |
Results: 10
Brazing of metallic conductors onto ceramic plates in solid oxide fuel cells - Part 1 Attaching a current collector
Authors: Wilkenhoener, R Buchkremer, HP Stoever, D Stolten, D Koch, A
Citation: R. Wilkenhoener et al., Brazing of metallic conductors onto ceramic plates in solid oxide fuel cells - Part 1 Attaching a current collector, J MATER SCI, 36(7), 2001, pp. 1775-1782
Brazing of metallic conductors onto ceramic plates in solid oxide fuel cells - Part II Attaching conducting wires
Authors: Wilkenhoener, R Buchkremer, HP Stoever, D Stolten, D Koch, A
Citation: R. Wilkenhoener et al., Brazing of metallic conductors onto ceramic plates in solid oxide fuel cells - Part II Attaching conducting wires, J MATER SCI, 36(7), 2001, pp. 1783-1788
Improved contacting by the use of silver in solid oxide fuel cells up to an operating temperature of 800 degrees C
Authors: Meulenberg, WA Teller, O Flesch, U Buchkremer, HP Stover, D
Citation: Wa. Meulenberg et al., Improved contacting by the use of silver in solid oxide fuel cells up to an operating temperature of 800 degrees C, J MATER SCI, 36(13), 2001, pp. 3189-3195
High-porosity titanium, stainless steel, and superalloy parts
Authors: Bram, M Stiller, C Buchkremer, HP Stover, D Baur, H
Citation: M. Bram et al., High-porosity titanium, stainless steel, and superalloy parts, ADV ENG MAT, 2(4), 2000, pp. 196-199
Failure of physical vapor deposition/plasma-sprayed thermal barrier coatings during thermal cycling
Authors: Teixeira, V Andritschky, M Gruhn, H Mallener, W Buchkremer, HP Stover, D
Citation: V. Teixeira et al., Failure of physical vapor deposition/plasma-sprayed thermal barrier coatings during thermal cycling, J THERM SPR, 9(2), 2000, pp. 191-197
Characterization and sinterability of oxide-dispersion strengthened nickelpowder produced by mechanical alloying
Authors: Mohamed, KE Buchkremer, HP Stover, D
Citation: Ke. Mohamed et al., Characterization and sinterability of oxide-dispersion strengthened nickelpowder produced by mechanical alloying, J MAT ENG P, 9(4), 2000, pp. 370-378
Analysis of residual stresses in thermal barrier coatings
Authors: Teixeira, V Andritschky, M Fischer, W Buchkremer, HP Stover, D
Citation: V. Teixeira et al., Analysis of residual stresses in thermal barrier coatings, J MATER PR, 93, 1999, pp. 209-216
Manufacture and stress rupture properties of hipped austenitic-ferritic transition joints
Authors: Buchkremer, HP Ennis, PJ Stover, D
Citation: Hp. Buchkremer et al., Manufacture and stress rupture properties of hipped austenitic-ferritic transition joints, J MATER PR, 93, 1999, pp. 368-370
Effects of deposition temperature and thermal cycling on residual stress state in zirconia-based thermal barrier coatings
Authors: Teixeira, V Andritschky, M Fischer, W Buchkremer, HP Stover, D
Citation: V. Teixeira et al., Effects of deposition temperature and thermal cycling on residual stress state in zirconia-based thermal barrier coatings, SURF COAT, 121, 1999, pp. 103-111
Mechanically alloyed Ni/8YSZ powder mixtures: preparation, powder characterization and sintering behavior
Authors: Wilkenhoener, R Vassen, R Buchkremer, HP Stover, D
Citation: R. Wilkenhoener et al., Mechanically alloyed Ni/8YSZ powder mixtures: preparation, powder characterization and sintering behavior, J MATER SCI, 34(2), 1999, pp. 257-265
Risultati: 1-10 |