AAAAAA
Results:
1-7
|
Results: 7
Authors:
Schulz, H
Dorr, J
Rass, IJ
Schulze, M
Leyendecker, T
Erkens, G
Citation: H. Schulz et al., Performance of oxide PVD-coatings in dry cutting operations, SURF COAT, 146, 2001, pp. 480-485
Authors:
Bouzakis, KD
Michailidis, N
Vidakis, N
Efstathiou, K
Leyendecker, T
Erkens, G
Wenke, R
Fuss, HG
Citation: Kd. Bouzakis et al., Optimization of the cutting edge radius of PVD coated inserts in milling considering film fatigue failure mechanisms, SURF COAT, 133, 2000, pp. 501-507
Authors:
Bouzakis, KD
Koutoupas, G
Siganos, A
Leyendecker, T
Erkens, G
Papapanagiotou, A
Nikolakakis, P
Citation: Kd. Bouzakis et al., Increasing of cutting performance of PVD coated cemented carbide inserts in chipboard milling through improvement of the film adhesion, considering the coating cutting loads, SURF COAT, 133, 2000, pp. 548-554
Authors:
Bouzakis, KD
Vidakis, N
Michailidis, N
Leyendecker, T
Erkens, G
Fuss, G
Citation: Kd. Bouzakis et al., Quantification of properties modification and cutting performance of (Ti1-xAlx)N coatings at elevated temperatures, SURF COAT, 121, 1999, pp. 34-43
Authors:
Cremer, R
Witthaut, M
Neuschutz, D
Erkens, G
Leyendecker, T
Feldhege, M
Citation: R. Cremer et al., Comparative characterization of alumina coatings deposited by RF, DC and pulsed reactive magnetron sputtering, SURF COAT, 121, 1999, pp. 213-218
Authors:
Lugscheider, E
Knotek, O
Barimani, C
Leyendecker, T
Lemmer, O
Wenke, R
Citation: E. Lugscheider et al., PVD hard coated reamers in lubricant-free cutting, SURF COAT, 112(1-3), 1999, pp. 146-151
Authors:
Cremer, R
Mertens, R
Neuschutz, D
Lemmer, O
Frank, M
Leyendecker, T
Citation: R. Cremer et al., Formation of intermetallic cobalt phases in the near surface region of cemented carbides for improved diamond layer deposition, THIN SOL FI, 356, 1999, pp. 127-133
Risultati:
1-7
|