L. Albert et al., IMPROVED LEAD ALLOYS FOR LEAD ACID POSITIVE GRIDS IN ELECTRIC-VEHICLEAPPLICATIONS/, Journal of power sources, 67(1-2), 1997, pp. 257-265
Currently, the excessive weight of the positive grid is a limiting fac
tor to the increase of the specific energy of the lead/acid battery. W
ith present alloys, a thickness of a few millimeters is a pre-requisit
e in the processing of a positive grid which is submitted to heavy cor
rosion during the charge and deep-discharge cycles usually encountered
with electric vehicles. The search for a lighter battery approaching
the ALABC's goal of 50 Wh kg(-1) therefore requires the development of
a new set of alloys that are able to withstand mechanical stress and
corrosion experienced by a positive grid during the service life of an
electric-vehicle battery. The work reported here shows that tin addit
ion (to a level of 1.2 wt.%) or combined tin (to a level of 0.6 wt.%)
and silver (to a level of 0.05 wt.%) additions increase considerably b
oth the mechanical properties and the corrosion resistance of a Pb-0.0
8wt.%Ca-0.013wt%Al alloy. Gravity casting trials reveal that the tin-r
ich alloy (1.2 wt.%) and the silver-rich alloy (0.05 wt.%) could be us
ed directly in the industrial processing of batteries that use gel tec
hnology. Information is also given on the performances of these batter
ies when submitted to the international TC69 cycling test, as well as
indications of the minimum grid thickness that could be achieved with
these alloys without sacrificing battery cycle life. (C) 1997 Elsevier
Science S.A.