GOLD DIFFUSION AND INTERMETALLIC FORMATIO N IN AU AL2O3/AL FILM/
Citation
A. Tsuge et al., GOLD DIFFUSION AND INTERMETALLIC FORMATIO N IN AU AL2O3/AL FILM/, Nippon Kinzoku Gakkaishi, 59(11), 1995, pp. 1095-1102
Categorie Soggetti
Metallurgy & Metallurigical Engineering
SICI code
0021-4876(1995)59:11<1095:GDAIFN>2.0.ZU;2-Q
Abstract
Diffusion across the Al2O3 film in the Au/Al2O3/Al film system (the Al
film with 1 mu m thickness was vapor-deposited on a SiO2/Si substrate
and exposed to the atmosphere to form a natural oxide layer, then the
Au film was deposited on it.) at temperatures between 25 degrees and
500 degrees C has been studied by using Auger Electron Spectroscopy, X
-ray Photoelectron Spectroscopy and electrical resistivity measurement
. The temperature where Al is detected on the surface of the Au/Al2O3/
Al system is 100 degrees C higher than that on the surface of the regu
lar Au/Al system without the Al2O3 film. The activation energies for t
he intermetallic layer growth of the Au/Al2O3/Al system and the Au/Al
system are 110 and 72 kJ/mol, respectively. The Al2O3 film formed by t
he exposure in air (ca. 3.2 nm in thickness) acts as a barrier for dif
fusion in Au/Al. In addition, we observed the SEM image of cross secti
on of the Au/Al2O3/Al system. The Au-Al intermetallic layer is formed
in the Al layer in the initial stage of Au/Al2O3/Al diffusion by Bu di
ffusion through the Al2O3 film into the Al layer. On the other hand, w
e studied the effect of annealing environment on the diffusion for the
Au/Al2O3/Al system by using O-18 as tracer for SIMS analysis. The Au-
Al intermetallic layer grows in an island formation for the Au/Al2O3/A
l system and when annealed in air, the number of islands decreases. Be
cause, during heat treatment in air, the Al2O3 film is formed continuo
usly by supply of O-2 to the Al2O3 film through Au film.