A MONOLITHIC HEMT-HBT DIRECT-COUPLED AMPLIFIER WITH ACTIVE INPUT-MATCHING

Citation
Kw. Kobayashi et al., A MONOLITHIC HEMT-HBT DIRECT-COUPLED AMPLIFIER WITH ACTIVE INPUT-MATCHING, IEEE microwave and guided wave letters, 6(1), 1996, pp. 55-57
Citations number
5
Categorie Soggetti
Engineering, Eletrical & Electronic
ISSN journal
10518207
Volume
6
Issue
1
Year of publication
1996
Pages
55 - 57
Database
ISI
SICI code
1051-8207(1996)6:1<55:AMHDAW>2.0.ZU;2-I
Abstract
We have achieved the first active input matching of a monolithic micro wave integrated circuit through the use of a common-gate (CG) HEMT dir ectly coupled to the input of an HBT Darlington feedback amplifier, Th e HEMT and HBT devices were monolithically integrated on the same chip using selective MBE, This circuit features an active impedance match technique that eliminates the need for large microstrip matching compo nents, The novel amplifier obtains greater than 10-dB gain over a dc-5 GHz band, a maximum IP3 of 27 dBm, and a minimum noise figure of 3.7 dB. In comparison with a HBT-ONLY Darlington feedback design, the empl oyment of the CG HEMT results in a 6-dB improvement in IP3 and a 1.5-2 dB reduction in noise figure, By adjusting the common-gate HEMT bias, the input return-loss can be tuned for near ideal 50 Omega match (>20 dB). The actively matched HEMT-HBT amplifier demonstrates an active c ircuit technique, which can reduce the chip area and cost of HEMT-HBT MMIC's while improving their performance.