LEACHING OF A SILVER BEARING SULFIDE BY-PRODUCT WITH CYANIDE, THIOUREA AND CHLORIDE SOLUTIONS

Citation
Mf. Almeida et Ma. Amarante, LEACHING OF A SILVER BEARING SULFIDE BY-PRODUCT WITH CYANIDE, THIOUREA AND CHLORIDE SOLUTIONS, Minerals engineering, 8(3), 1995, pp. 257-271
Citations number
9
Categorie Soggetti
Engineering, Chemical","Mining & Mineral Processing",Mineralogy
Journal title
ISSN journal
08926875
Volume
8
Issue
3
Year of publication
1995
Pages
257 - 271
Database
ISI
SICI code
0892-6875(1995)8:3<257:LOASBS>2.0.ZU;2-O
Abstract
The aim of this research was to increase the value of sulphide tailing s assaying 1000-1500 g/ton Ag per tonne and high arsenic (about 13%) c ontent. The sulphides were characterized and it was verified that silv er occurs both as mathildite, AgBiS2, and in solid solution in galena. Three alternative routes were assessed: cyanidation, thiourea leachin g and chloride leaching. The cyanidation route showed that there was a high consumption of cyanide and led to the formation of an insoluble compound of silver thiocyanate. The leaching with thiourea was achieve d without the introduction of Fe3+ but it is not an economically viabl e route. Chloride leaching of the product in its original particle gra in size showed very good extraction even without addition of Fe3+. Ope rating under [Cl-]greater-than-or-equal-to3 M at 80-90-degrees-C for a t least 3 h it was possible to dissolve 60-80% of the total silver, an d higher recoveries of lead and bismuth were also achieved.