STUDY OF YBA2CU3O7-DELTA)(M) (PRBA2CU3-XGAXO7-DELTA(N) SUPERLATTICES GROWN BY PULSED-LASER DEPOSITION - A COMPARISON BETWEEN A-AXIS-ORIENTED AND C-AXIS-ORIENTED STRUCTURES/
Jp. Contour et al., STUDY OF YBA2CU3O7-DELTA)(M) (PRBA2CU3-XGAXO7-DELTA(N) SUPERLATTICES GROWN BY PULSED-LASER DEPOSITION - A COMPARISON BETWEEN A-AXIS-ORIENTED AND C-AXIS-ORIENTED STRUCTURES/, Applied surface science, 75, 1994, pp. 252-258
Citations number
21
Categorie Soggetti
Physics, Condensed Matter","Chemistry Physical","Materials Science, Coatings & Films
Superlattices of YBa2Cu3O7-delta/PrBa2Cu3-xGaxO7-delta (x = 0.2) have
been grown by multitarget pulsed-laser deposition on SrTiO3{100} and M
gO{100} substrates with their c-axis either normal or parallel to the
substrate surface, depending on the growth temperature. At a temperatu
re of 785 degrees C the multilayers are deposited with the c-axis norm
al to the substrate surface, but with a buffer layer of PrBa2Cu3-xGaxO
7, grown at a lower temperature (650 degrees C), the superstructure be
comes c-parallel. Secondary-ion mass spectrometry reveals no interdiff
usion between Y and Pr, and no diffusion of Ga into the YBa2Cu3O7-delt
a layer. Nevertheless, the profiles of the c-normal-oriented superlatt
ice are sharper than the c-parallel ones. The 15% minimum yield (chi(m
in)) measured from RBS in channeling geometry for the c-normal superla
ttices indicates highly textured growth on SrTiO3, contrary to that wh
ich is observed for c-parallel superlattices (chi(min)= 28%) and for c
-normal structures grown over an MgO substrate (chi(min) = 50%). The l
ow interface roughness of the c-normal multilayers grown on SrTiO3 is
demonstrated by AFM measurements, which give a standard deviation lowe
r than 1.6 nm over 6.25 mu m(2), and also by the streaky RHEED pattern
s observed at the end of the growth.