S. Ramakrishnan et Mw. Rogozinski, PROPERTIES OF ELECTRIC-ARC PLASMA FOR METAL-CUTTING, Journal of physics. D, Applied physics, 30(4), 1997, pp. 636-644
The properties of plasmas generated for the air plasma cutting process
have been investigated in this study. The plasma are cutting process
employs a plasma torch with a very narrow bore to produce a transferre
d are to the workpiece at an average current density of similar to 5 k
A cm(-2) within the bore of the torch. The energy and momentum of the
high-velocity plasma jet generated by the plasma torch melts, vaporize
s and removes the metal from the region of impingement of the jet. Mea
surements have been made of the total are voltage, nozzle voltage, air
flow rate and nozzle pressure over a range of are currents of 40-160
A for a nozzle with a bore of 1.5 mm. Using high-resolution digital ph
otography, the radius of the are at the nozzle exit has been measured
over the current range. Photographic observations indicate that an und
erexpanded supersonic plasma jet emanates from the nozzle. An approxim
ate two-zone are model has been developed to estimate the are radius,
voltage and pressure of the are at the nozzle exit as a function of cu
rrent and the predicted results have been compared with experiments. T
he study reveals that the nozzle of the plasma torch is heavily clogge
d because of the presence of an electric are with a very high current
density in the nozzle. The nozzle clogging effect increases the pressu
re in the chamber upstream of the nozzle as the are current is increas
ed for a constant mass flow rate of air. The nozzle clogging phenomeno
n is crucial to generate a plasma jet with the high momentum required
to remove material from the molten workpiece and to maintain plasma st
ability.