Bg. Thomas et al., SIMULATION OF ARGON GAS-FLOW EFFECTS IN A CONTINUOUS SLAB CASTER, Metallurgical and materials transactions. B, Process metallurgy and materials processing science, 25(4), 1994, pp. 527-547
Three-dimensional finite-volume-based numerical models of fluid, heat,
and mass transport have been developed and applied to help explain th
e complex inter-related phenomena of multiphase fluid flow, superheat
dissipation, and grade intermixing during the continuous casting of st
eel slabs, Gas bubbles are simulated using a continuum model, which ca
lculates the volume fraction and velocities of the gas, and its effect
on the liquid flow. Turbulence has been incorporated using the standa
rd K-epsilon turbulence model. Reasonable agreement has been achieved
between predicted velocities and corresponding measurements and observ
ations in full-scale water models, both with and without gas injection
. The effects of argon gas bubble injection on flow-related phenomena
are investigated with simulations of a typical steel slab caster. Argo
n bubbles alter the flow pattern in the upper recirculation zone, shif
ting the impingement point and recirculation zones upward. The effect
increases with increasing gas fraction and decreasing bubble size. Arg
on injection also causes superheat to be removed higher in the caster,
moves the hot spot upward, lowers the peak heat flux, and increases h
eat extraction from the wide face and meniscus regions. During a steel
grade transition, argon injection slightly affects slab surface compo
sition but has no effect on intermixing in the slab interior.