PERFORMANCE OF 1.3 MU-M RIDGE-WAVE-GUIDE DISTRIBUTED-FEEDBACK LASERS FABRICATED BY ONE-STEP METALORGANIC CHEMICAL-VAPOR-DEPOSITION

Citation
H. Lu et al., PERFORMANCE OF 1.3 MU-M RIDGE-WAVE-GUIDE DISTRIBUTED-FEEDBACK LASERS FABRICATED BY ONE-STEP METALORGANIC CHEMICAL-VAPOR-DEPOSITION, IEE proceedings. Optoelectronics, 141(5), 1994, pp. 316-322
Citations number
19
Categorie Soggetti
Engineering, Eletrical & Electronic",Optics,Telecommunications
ISSN journal
13502433
Volume
141
Issue
5
Year of publication
1994
Pages
316 - 322
Database
ISI
SICI code
1350-2433(1994)141:5<316:PO1MRD>2.0.ZU;2-C
Abstract
Ridge waveguide distributed feedback (DFB) lasers emitting at 1.3 mu m wavelength have been fabricated by one-step metal-organic chemical de position over a first order grating in an InP substrate. Threshold cur rents as low as 13-18 mA were obtained for devices with as-cleaved fac ets and 15-20 mA for devices with one AR-coated facet. A slope efficie ncy as high as 0.32 mW/mA, single mode performance up to 20 mW, and a side mode suppression ratio of 45 dB have been achieved. For lasers wi th a coupling x length product, kappa L, Of 2.5-3.5 and the single lon gitudinal-mode detuned 10-20 nm to the shorter wavelength side of the material gain peak, a high resonance frequency and a small wavelength chirp have been observed. Small signal frequency responses were measur ed with a -3 dB bandwidth of 11 GHz at 12 mW output power. The devices showed good open eye patterns under direct modulation up to 10 Gbit/s .