Jb. Claridge et al., New catalysts for the conversion of methane to synthesis gas: Molybdenum and tungsten carbide, J CATALYSIS, 180(1), 1998, pp. 85-100
High-surface-area molybdenum and tungsten carbide materials, synthesised by
the temperature programming reduction of the relevant metal oxide with met
hane/hydrogen, are highly efficient catalysts for the conversion of methane
to synthesis gas, via the steam reforming, dry reforming, or partial oxida
tion processes. The activities of the carbides were found to be comparable
to those of elemental iridium and ruthenium (well known to be active noble
metal catalysts for the reforming of methane), and the conversion and produ
ct distribution were in accord with those calculated from the thermodynamic
equilibria. At ambient pressure the carbides deactivated, in all the proce
sses, due to the oxidation of the catalyst to MO2, while operation at eleva
ted pressure (8 bar) resulted in stabilisation of the carbide and no cataly
st deactivation for the duration of the experiments (72 h). HRTEM analysis
showed that no macroscopic carbon was deposited on the catalysts during the
catalytic reactions. The deactivation rate of the carbides reflected the s
trength of the oxidant used: oxygen > water congruent to carbon dioxide. A
deactivation mechanism, via the insertion of O* resulting in oxide terraces
is discussed, and two possible mechanisms for the production of synthesis
gas by the methane dry reforming reaction over metal carbides are proposed:
noble metal type and redox type. (C) 1998 Academic Press.