SYNTHESIS AND PROPERTIES OF POLYIMIDES DERIVED FROM 1,4-BIS(4-AMINOPHENOXY)2,5-DI-TERT-BUTYLBENZENE

Novel aromatic polyimides containing symmetric, bulky di-tert-butyl su bstituents unit were synthesized from 1,4-bis(4-aminophenoxy)2,5-di-te rt-butylbenzene (BADTB) and various aromatic tetracarboxylic dianhydri des by the conventional two-stage procedure that included ring-opening polyaddition in a polar solvent such as N,N-dimethylacetamide to give poly(amic acid)s, followed by cyclodehydration to polyimides. The dia mine was prepared through the nucleophilic displacement of 2,5-di-tert -butylhydroquinone with p-chloronitrobenzene in the presence of K2CO3, followed by catalytic reduction. Depending on the dianhydrides used, the poly(amic acid)s obtained had inherent viscosities of 0.83-1.88 dL g(-1). Most of the polyimides formed transparent, flexible, and tough films. Tensile strength and elongation at break of the BADTB-based po lyimide films ranged from 68-93 MPa and 7-11%, respectively. The polyi mide derived from 4,4'-hexafluoro-isopropylidenebisphathalic anhydride had better solubility than the other polyimides. These polyimides had glass transition temperatures between 242-298 degrees C and 10% mass loss temperatures were recorded in the range of 481-520 degrees C in n itrogen. (C) 1997 John Wiley & Sons, Inc.