A fine cobalt-toughened Al2O3-TiC ceramic and its wear resistance

Mechanical ball milling is the most common method for mixing ceramic powder s with a ductile phase such as metal particles. In this paper, a new powder processing way is presented. Al2O3 and TiC powders are coated with a layer of metal cobalt using the chemical deposition process. The thickness of th e metal cobalt film can be controlled by adjusting the deposition condition s. The Co-coated Al2O3 (Al2O3-Co) and TiC (Tic-Co) powders are mixed at the rate of 7:3 and hot-press sintered into a fine Al2O3-TiC-Co (ATG) ceramic. The main properties, erosion behaviour, abrasion behaviour, wear mechanism and wear resistance of Al2O3-TiC-Co and Al2O3-30 wt % TiC (AT(30)) ceramic s are determined by transmission electron microscopy, scanning electron mic roscopy, energy dispersive X-ray spectroscopy, etc, it is shown that the AT C ceramic possesses improved mechanical properties. Because of the existenc e of metal cobalt in the grain boundaries, the bonding strength between gra ins is increased, and this prevents spalling of grains during wear. Experim entation indicates that ATC is more resistant to wear than Al2O3-TiC cerami c. The relationship between their mechanical properties and wear resistance is also discussed in this paper. (C) 1998 Kluwer Academic Publishers.