N. Koura et T. Sakaue, A METHOD FOR EVALUATING THE PERFORMANCE OF POSITIVE ELECTRODE GRIDS OF LEAD ACID BATTERIES/, Journal of power sources, 69(1-2), 1997, pp. 69-74
.For a battery plate to function satisfactorily, there must be a good
contact at the interface between the grid and active material. This is
because the adhesion of the active material strongly effects the cell
performance. The adhesion of the active material changes due to the s
tate of the interface between the grid and active material. in this st
udy, the adhesion of active material is examined by evaluation of the
grid surface. A grid with good adhesion of the active material has the
following characteristics: (i) the change in the rest potential is fa
st; (ii) the lead sulfate membrane formed on the grid surface is thin,
and (iii) the change in potential during the oxidation is slow. Good
or bad adhesion of the active material can be judged using an evaluati
on method based on these criteria. The annealling treatment of the gri
d is investigated using this evaluation method. The optimum conditions
of annealling are 170 degrees C and 24 h. (C) 1997 Elsevier Science S
.A.