PREPARATION OF CE AND ND BETA-SIALON CERAMICS BY ALPHA-]BETA SIALON TRANSFORMATION

It has previously been accepted that lanthanum and cerium do not form alpha-sialon structures because their ions are too large to enter the interstices in the structure. Recent work on heat treatment of rare ea rth densified alpha- and mixed alpha-beta sialons has shown that many alpha-sialon compositions prepared by sintering at 1750-1800 degrees C are unstable at lower (1300-1600 degrees C) temperatures. This instab ility is dependent on the alpha-sialon composition, and is more marked for alpha-sialons prepared using low, rather than high, atomic number rare earths. An important requirement of such studies is rapid quench ing of the initial sintered sample in order to prevent decomposition o f the alpha-sialon phase during cooling. The present work demonstrates that cerium stabilised alpha-sialon is in fact stable at sintering te mperatures, and that this phase has not been observed previously becau se, under normal cooling rates, the alpha-phase totally transforms to beta-sialon (plus glass) on cooling. Similar phenomena are discussed i n the case of Nd2O3 densified sialons, where a fine grain size beta-si alon matrix can be observed by decomposition of an alpha-sialon phase initially formed at sintering temperatures. The alpha reversible arrow beta transformation provides a useful processing variable for optimis ing the microstructure, and hence the mechanical properties of beta- a nd mixed alpha-beta sialon ceramics. (C) 1997 The Institute of Materia ls.