Cp. Jones et al., THE EFFECT OF STRAIN-HARDENING ON SHAKEDOWN LIMITS OF A PEARLITIC RAIL STEEL, Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit, 211(2), 1997, pp. 131-140
The load limit below which a material remains elastic for the first ap
plication of load is known as the elastic limit. However, material in
a railway rail is loaded not once but many times and the load limit be
low which the material remains elastic in the steady state is known as
the elastic shakedown limit, This limit is higher than the elastic li
mit, and is the basis of tribological design. Such limits are known fo
r solids which have hardness unvarying with depth. However, techniques
of heat treatment or coating lead to a variation in hardness with dep
th for which the effect on the shakedown limit has only recently been
established. In the present work the influence of strain hardening on
the shakedown limit of a pearlitic rail steel has been analysed. The d
ata used were taken from an experimental study by Tyfour et al. (1) in
which wheel-rail contact was simulated by rolling-sliding line contac
t. The results indicate that the load bearing capacity increases to ab
out four times that without strain hardening in line contact, and even
more in point contact.