EFFECT OF OXYGEN-ION ENERGY AND ANNEALING IN FORMATION OF TIN OXIDE THIN-FILMS

Tin oxide (SnOx) thin films were deposited by ion-assisted deposition (IAD) at various ion beam voltages (V-I) onto amorphous SiO2/Si substr ate at room temperature. Tin oxide thin films with nonstoichiometric/s toichiometric composition were fabricated. The as-deposited SnOx films were mostly amorphous, but they exhibited various degrees of crystall inity and fine grain size after annealing at 500 degrees C for Ih in a ir. The annealed film deposited using an ion beam energy (E-I) of 300 eV showed a preferred orientation along the SnO2 (110) plane. The pref erred orientation changed to SnO2 (002) for film 1000 (the annealed fi lm deposited with E-I = 1000 eV) through an amorphous intermediate str ucture of film 500 (the annealed film deposited with E-I = 500 eV). X- ray photoelectron spectroscopy study showed that the main Sn3d peaks i n all samples were similar to the binding energy of Sn4+ and the atomi c ratios for all the films were higher than 1.51. For the film grown u nder an average energy of 123 eV/atom, the refractive index was 2.0 an d the estimated porosity was 5.2% smaller than that of the other films .