THE MANUFACTURE AND CHARACTERIZATION OF ALIGNED FIBERS OF THE FERROXPLANA FERRITES CO(2)Z, 0.67-PERCENT CAO-DOPED CO(2)Z, CO2Y AND CO2W

Citation
Rc. Pullar et al., THE MANUFACTURE AND CHARACTERIZATION OF ALIGNED FIBERS OF THE FERROXPLANA FERRITES CO(2)Z, 0.67-PERCENT CAO-DOPED CO(2)Z, CO2Y AND CO2W, Journal of magnetism and magnetic materials, 186(3), 1998, pp. 313-325
Citations number
28
Categorie Soggetti
Material Science","Physics, Condensed Matter
ISSN journal
03048853
Volume
186
Issue
3
Year of publication
1998
Pages
313 - 325
Database
ISI
SICI code
0304-8853(1998)186:3<313:TMACOA>2.0.ZU;2-P
Abstract
Gel fibres of Co(2)Z, 0.67% CaO-doped Co(2)Z, Co2Y and Co2W ferrite we re blow spun from an aqueous inorganic sol and collected as an aligned tow blanket, with an alignment comparable to that found in commercial fibres. The fibres were then heated to produce the desired ceramic ph ases, characterised by various techniques and their ferromagnetic reso nance spectra measured. Single phase Co(2)Z was found by X-ray diffrac tion to form at a relatively low temperature of between 1200 degrees C and 1250 degrees C, and the material exhibited the expected microwave properties. Furthermore, an addition of 0.67% CaO was found to promot e the formation of Co(2)Z at an even lower temperature of below 1200 d egrees C and delay the exaggerated platy grain growth, which is normal ly encountered at the onset of formation of the Co(2)Z phase and which results in a mechanically weakened fibre. (C) 1998 Elsevier Science B .V. All rights reserved.