Transition metal catalysis in fluorous media: Practical application of a new immobilization principle to rhodium-catalyzed hydroborations of alkenes and alkynes

Addition of a yellow-orange toluene solution of [Rh(CI)(COD)](2) to a color less CF3C6F11 solution of P(CH2CH2Rf6)(3) (R-f6 = ((CF2)(5)CF3)(3)) gives a colorless toluene solution of COD and an orange CF3C6F11 solution of ClRh[ P(CH2CH2Rf6)(3)](3) (1). Evaporation of CF3C6F11 gives analytically pure 1 (94%), which is insoluble in most organic solvents and stable to 300 degree s C. Alkenes, catecholborane, and CF3C6F11 solutions of 1 (950:950:1 mol ra tio for norbornene) are stirred for 1-24 h at 40 degrees C (heterogeneous c onditions). The resulting alkylboranes are extracted with benzene (2x; turn over number (TON) 854 (90%) for norburnene), toluene, or THF, and the catal yst solution is reused (TON 2409 for three cycles). Subsequent reactions wi th H2O2/NaOH give alcohols, which are isolated in 92-77% yields (11 example s). Longer reaction times afford TON values higher than 10 000 (<0.1 mol % 1). Analogous reactions of alkynes yield alkenylboranes (89-88%). Pinacolbo rane additions are also catalyzed. A higher homologue of 1, ClRh[P(CH2CH2Rf 8)(3)](3) (2), and the nonfluorinated analogue ClRh[P((CH2)(7)CH3)(3)](3) a re similarly prepared. Solubilities and reactivities are compared. Atomic a bsorption analyses shows rhodium losses of 0.4% (1) and 0.2% (2) per cycle, corresponding to 4.5-2.2 ppm rhodium/mol of addition product. These data d emonstrate the viability and practicality of an exciting new approach to ca talyst immobilization.