AN ASSESSMENT OF THE SACHS METHOD FOR MEASURING RESIDUAL-STRESSES IN COLD-WORKED FASTENER HOLES

Measurements of residual stresses in 6 mm thick aluminium alloy 2024 p lates containing 4 per cent cold worked fastener are made using the Sa chs method. The measurements are made on discs extracted from the plat es. The measured tangential residual stress distribution adjacent to t he hole edge are found to be affected by the disc diameter. The measur ed residual stresses are also in good agreement with averaged through- thickness predictions of residual stresses from an axisymmetric finite element (FE) model of the cold working process. A finite element anal ysis is also conducted to simulate disc extraction and then the Sachs method. The measured FE residual stresses from the Sachs simulation ar e found to be in good agreement with the averaged through-thickness pr edicted residual stresses. The Sachs simulation was not able to reprod uce the detailed near-surface residual stresses found from the finite element model of the cold working process.