EFFECT OF NB2O5 AND Y2O3 ALLOYING ON THE MECHANICAL-PROPERTIES OF TZPCERAMICS

Citation
Dy. Lee et al., EFFECT OF NB2O5 AND Y2O3 ALLOYING ON THE MECHANICAL-PROPERTIES OF TZPCERAMICS, Ceramics international, 24(6), 1998, pp. 461-465
Citations number
16
Categorie Soggetti
Material Science, Ceramics
Journal title
ISSN journal
02728842
Volume
24
Issue
6
Year of publication
1998
Pages
461 - 465
Database
ISI
SICI code
0272-8842(1998)24:6<461:EONAYA>2.0.ZU;2-U
Abstract
In the ZrO2-Y2O3-Nb2O5 ternary system, Nb2O5 and Y2O3 co-doped tetrago nal ZrO2 polycrystals (TZPs) were synthesised by sintering and hot-pre ssing (HPing) to evaluate the effect of alloying on the mechanical pro perties and phase stability of TZPs. Monolith containing the compositi on of 90.24 mol% ZrO2-5.31 mol% Y2O3-4.75 mol% Nb2O5, which was prepar ed by both sintering and hot-pressing, exhibited a good relation betwe en strength and toughness. Also, no t-->m phase transformation after a geing at temperatures in the range of 100 to 400 degrees C for up to 1 000 h was observed. TZPs sintered at 1550 degrees C for 10 h in air sh owed the flexural strength of above 500 MPa and the fracture toughness of 9 MPa m(1/2). The flexural strength increased greatly by HPing at 1400 degrees C for 1 h under an Ar gas atmosphere from 500 MPa to abov e 1 GPa, while the fracture toughness decreased slightly from 9 MPa m( 1/2) to 7.5 MPa m(1/2). (C) 1998 Elsevier Science Limited and Techna S .r.l. All rights reserved.