IN-SITU X-RAY STANDING-WAVE ANALYSIS OF ELECTRODEPOSITED CU MONOLAYERS ON GAAS(001)

Copper was electrodeposited onto n- and p-type GaAs(001) from mMol sol utions of CuSO4 in 0.5 Mol sulfuric acid and the registration of the C u adsorbate was analyzed with respect to the GaAs lattice in situ with x-ray standing waves, recording the Cu-K alpha fluorescence radiation from the sample surface while scanning the GaAs(004) Bragg reflection . For coverages below 1 ML, the determined coherent position P-Cu(004) approximate to 0.0 is in agreement with a substitutional site of the Cu. However, the coherent fraction F-004 less than or equal to 0.4 ind icates that the Cu is not well ordered or occupies other sites. The me asurements also show that part of the Cu diffuses a few nm into the bu lk in an amount that is larger for n type (approximate to 0.5 ML) than for p type (less than or similar to 0.05 ML). If thick Cu layers are stripped at anodic potentials, the Cu desorption starts to significant ly slow down at Cu coverages of about 10 ML while the anodic current s tays almost constant, which is explained by the fact that the Cu film is no longer continuous. At coverages less than or similar to 1 ML the stripping becomes extremely slow and Cu stays at the GaAs(OO 1) inter face even while the GaAs surface dissolves, exhibiting a ''reversed su rfactant'' behavior. [S0163-1829(98)03539-5].