Grain boundary segregation of antimony in iron base alloys and its effect on toughness

The equilibrium grain boundary segregation of antimony was investigated in iron base alloys (Fe-Sb, Fe-C-Sb, Fe-Ni-Sb) after annealing at temperatures between 550 and 750 degrees C. Utilizing Auger electron spectroscopy (AES) the concentration of antimony at intergranular fracture faces was determin ed as a function of bulk concentration and equilibration temperature. The s egregation of antimony in Fe-Sb alloys with mass contents of between 0.012 and 0.094 % Sb was described by the Langmuir-McLean equation. The evaluatio n leads to the free enthalpy of segregation Delta G(segr) = -19 kJ/mol - T 28 J/mol K. The relatively low value for the segregation enthalpy Delta H = -19 kJ/mol indicates a rather small tendency for grain boundary segregatio n of Sb. However, its embrittling effect is strong. scanning electron micro graphs (SEM) of fractured samples show that the percentage of intergranular fracture strongly increases with an increasing coverage of antimony at the grain boundaries. The data for Fe-0.93% Sb and Fe.1.91% Sb (mass contents) do not fit in the thermodynamic evaluation obviously due to formation of a ntimonide precipitates in the grain boundaries. The addition of carbon to F e-Sb alloys results in a higher grain boundary cohesion which is caused by two effects of carbon. displacement of antimony from the grain boundaries b y carbon and enhanced grain boundary cohesion. In the Fe-Ni-Sb alloys addit ional segregation of nickel was found at the grain boundaries but no enhanc ed antimony segregation, as expected from previous models of other authors, assuming Ni-Sb cosegregation.