The center post alternate design version for volumetric neutron source based on spherical torus

A spherical-torus type facility is one of the main candidates for a volumet ric neutron source. The normal conducting magnet system of this facility is characterized by harsh operation conditions: high level of irradiation, oh mic heating and electromagnetic loads, which is why more attention should b e paid to the center post (CP), an inboard part of the single-turn toroidal field coil. The alternate design version of the CP is developed with consi deration for technological producibilities. The CP consists of the core and two extensions installed on the core ends by a press fit. The core is asse mbled from a rod and coaxial tubes and each extension consists of coaxial t ubes successively set on the core. The thermo-hydraulic analysis of the CP is carried out taking into account the ohmic and neutron heating, as well a s conductor resistivity increase after irradiation. Maximum conductor tempe rature does not exceed 200 degrees C. The CP stress analysis shows that all applied loads (volumetric electromagnetic forces; nonuniform heating; wate r pressure in the cooling channels; dead weight and hot fitting) lead to th e maximum stress intensity of 260 MPa. (C) 1999 Elsevier Science S.A. All r ights reserved.