Block copolyurethanes containing poly(12-hydroxy stearate) and poly(oxy tetramethylene) segments: some aspects of synthesis

Citation
Pr. Nair et al., Block copolyurethanes containing poly(12-hydroxy stearate) and poly(oxy tetramethylene) segments: some aspects of synthesis, EUR POLYM J, 35(12), 1999, pp. 2185-2192
Citations number
20
Categorie Soggetti
Organic Chemistry/Polymer Science
Journal title
EUROPEAN POLYMER JOURNAL
ISSN journal
00143057 → ACNP
Volume
35
Issue
12
Year of publication
1999
Pages
2185 - 2192
Database
ISI
SICI code
0014-3057(199912)35:12<2185:BCCPSA>2.0.ZU;2-W
Abstract
Block copolyurethane networks containing blocks of poly(12-hydroxy stearate ) (PTHS) and poly(oxy tetramethylene) (POTM) were realized by two synthesis strategies. In a single-step synthesis, a PTHS-based polyol, viz. ISRO pol yol and hydroxy telechelic poly(oxy tetramethylene), were co-cured in the p resence of tolylene diisocyanate (TDI) using trimethylol propane (TMP) as c rosslinker. In this case, increasing POTM content resulted in an initial im provement in mechanical properties, but enhancing its concentration beyond 20% by weight was detrimental to the properties. At this stage, the cure re action was found to be incomplete and the partly cured system showed visibl e phase separation. This has been attributed to the differential reactiviti es of the OH groups of varying nature present on the polyols towards TDI th at could lead to chain-extended homopolyurethane segments accelerating the phase separation. The possible non-uniform distribution of the crosslinker in the two phases and consequent imbalance in OH/NCO rapport might lead to incomplete crosslinking. This problem was overcome by pre-reacting PTHS and hydroxy functional POTM through an esterification reaction to result in a block copolyol. The composition of POTM in the block copolyol was varied us ing hydroxy functional POTM of different molecular weights, which were synt hesized through the cationic ring opening polymerization of tetrahydrofuran . Curing the block copolyol using TDI and TMP resulted in a homogeneous blo ck copolyurethane network. Increasing the concentration and chain length of POTM block was conducive to enhancing both the tensile strength and elonga tion of the polyurethane network. The phase miscibility of the formed block copolyurethane was inferred from the occurrence of a single glass transiti on temperature (T-g) for the polymer. Enhancing POTM content decreased the T-g of the copolyurethane in conformation with Fox's law for a homogeneous copolymer. (C) 1999 Elsevier Science Ltd. AII rights reserved.