Instrumentation to quantify exercise using an impulse inertial system

An impulse-momentum exercise system was instrumented for collection of kine matic and kinetic data during shoulder exercise. The objective of this stud y was to quantify the dynamics of an exercise system that utilizes a weight ed shuttle (22.2 N) traveling on a rail system and evaluate its efficacy as an exercise and rehabilitative tool. Two healthy adults (mean age, 30.0 ye ars) were tested utilizing 2 protocols. The first protocol required the sub ject to maintain tension in the system while externally rotating the upper arm from neutral to 90 degrees relative to the shoulder and then internally rotating back to the initial position. Tn the second protocol, the range o f motion was similar, but each subject was instructed to carry out the exer cise as rapidly as possible without regard to the tension in the rope, thus creating an impulsive load. Average peak loads up to 87.9 and 137.0 N were recorded using the first and second protocols, respectively. Average maxim um loads using the second protocol were approximately 50 N greater than tho se using the first protocol (p <.05). Representative calculations demonstra ted that less mechanical work was performed during the first protocol (-3.8 to -45.9%). Qualitatively the shuttle acceleration curves appear dramatica lly different, although similar average peak accelerations are achieved dur ing use (4.12 vs. 3.47 m/s(2), protocol I vs. protocol 2, respectively).