The experiments were conducted to investigate the sorption of arsenic from
the groundwater onto kimberlite tailings, the mineral waste from diamond mi
ning, in two phases - batch studies and column studies. In batch studies, t
he effects of different factors such as pH, adsorbent dose and adsorbent si
ze on the performance of kimberlite tailings were investigated. Adsorption
kinetics and equilibrium isotherm studies were also carried out. The adsorp
tion capacity of kimberlite tailings was calculated as 0.25 mg/g of adsorbe
nt. In column studies, the performance of fixed-bed kimberlite tailings was
studied and the adsorption capacity was found to be 0.27 mg/g of adsorbent
. Film diffusion was found to be the rate-limiting factor for the removal o
f arsenic by kimberlite tailings. Adsorption of arsenic was found to be pH
dependent and higher removal efficiencies were observed near neutral pH ran
ge. The arsenic uptake increased with increase in adsorbent dose. Spent kim
berlite tailings could be regenerated with dilute NaOH. The proposed treatm
ent methodology was applied to the groundwater samples collected from vario
us places of North 24-Parganas district situated in West Bengal, India. The
samples were analyzed for the presence of total arsenic. The arsenic conta
mination of groundwater was found to be location specific in North 24-Parga
nas district. The maximum arsenic concentration at certain places was found
to be many folds more than the WHO recommended limits. The treatment of ar
senic contaminated water samples with kimberlite tailings showed 90-94% rem
oval in 12 hours. The present study can be used as a basis for designing an
d developing filter columns, which can be attached to the tube wells for lo
w cost and effective removal of arsenic.