R. Patrick et al., Application of direct bias control in high-density inductively coupled plasma etching equipment, J VAC SCI A, 18(2), 2000, pp. 405-410
The use of a novel method of power delivery control at the wafer chuck in a
high-density inductively coupled plasma reactor has been investigated. Thi
s method involves using a peak voltage sensor mounted immediately below the
chuck in a feedback loop to the rf generator such that the rf peak voltage
can be set as a recipe parameter. By controlling the power delivery in thi
s manner, it is demonstrated that the effects of power losses in the rf cir
cuit between the generator and the chuck, especially in the match network,
can be compensated for. In addition, the effect of interactions among sourc
e power, bias power and other process parameters on sheath voltage can also
be eliminated. In this manner a more complete decoupling of plasma density
and ion energy can be achieved than more conventional methods of power del
ivery allow. (C) 2000 American Vacuum Society. [S0734-2101(00)05902-9].