J. Riondato et al., Fast and reliable determination of (ultra-)trace and/or spectrally interfered elements in water by sector field ICP-MS, J ANAL ATOM, 15(4), 2000, pp. 341-345
Sector field ICP-MS, commonly referred to as high resolution ICP-MS, is a p
owerful technique that is very suited to determining elements at ultra-trac
e levels and/or elements which are spectrally interfered at low mass resolu
tion, without any preliminary work such as preconcentration or analyte/matr
ix separation. The interest for the accurate and precise determination of (
ultra-) trace elements in water, e.g., drinking and ground water, derives f
rom the necessity to ensure the quality of drinking water supplies and to p
rotect natural water reserves. This paper describes the suitability of sect
or field ICP-MS for water analysis owing to the low detection limits, even
for elements spectrally interfered at low mass resolution, and the nearly n
egligible matrix effects. This has been demonstrated by the measurement of
the levels of several ultra-(trace) elements (Ag, Cd, V, Cr, As and Se) in
a number of mineral waters originating from Belgium and France. Although no
ne of the concentrations determined exceeded the drinking water guidelines,
a few surprisingly high V and As values were encountered for a particular
mineral water source. Evidently, accuracy is a prerequisite for analytical
data to be relevant. Therefore an international certification campaign was
organised by the European Union (Standards, Measurement and Testing, SMT Pr
ogramme) for the determination of Al, Mg, Ca, Mn and Fe in groundwater cand
idate reference materials. Matrix effects were not negligible and necessita
ted dilution of the samples. With single standard addition for calibration,
combined with the use of appropriate internal standards, accurate results
in good agreement with the results obtained by other techniques in other la
boratories were obtained with sector field ICP-MS. An intercomparison study
was also performed in co-operation with a sub-division (RIZA) of the Dutch
Ministry of Transport, Public Works and Water Management, in which the con
centrations of some heavy metals were determined in pore water samples. The
actual purpose was the investigation of heavy metal fluxes from the water-
floor towards the surface water. The elements of interest, Cr, Ni, Cu, Zn,
Cd and Pb (mostly present at sub-ppb levels), were determined using sector
field-ICP-MS since this technique offered the lowest detection limits attai
nable.