Kj. Niklas et Hc. Spatz, Wind-induced stresses in cherry trees: evidence against the hypothesis of constant stress levels, TREES, 14(4), 2000, pp. 230-237
We calculated the wind-induced bending moments and stresses generated in th
e stems of five Prunus serotina conspecifics differing in height and canopy
shape and size (based on detailed measurements of stem projected area and
location with respect to ground level) to test the hypothesis that wind-loa
ds generate uniform and constant stress levels along the lengths of tree tw
igs, branches, and trunks. These calculations were performed using five dif
ferent wind speed profiles to evaluate the relative importance of the shape
of wind speed profiles versus the 'geometry' of tree shape on stem stress
distributions and magnitudes. Additionally, we evaluated the effect of abso
lute tree size and stem taper on wind-induced stresses by scaling the size
of smaller conspecifics to the absolute height of the largest of the five t
rees yet retaining the original stem proportions (i.e.. diameter relative t
o stem length) for each plant. Finally, we also determined how the factor o
f safety For wind-loading (i.e.. the quotient of stem yield stress and wind
-load stress) changed as a function of tree size (and, presumably, age). Ou
r results indicate that wind-load stress levels (1) vary along stem length
even for the same wind speed profile and the same maximum wind speed; (2) w
ould increase to dangerous levels with increasing tree height if it were no
t for ontogenetic changes in stem taper and canopy shape that reduce stress
intensities to manageable levels; (3) tend to be more dependent on stem ta
per and canopy shape and size than on the shape of the wind speed profile;
and (4) the factor of safety against wind-induced mechanical failure decrea
ses as trees get larger, but varies along the length of large trees such th
at preferential stem failure is likely and functionally adaptive. We thus (
1) reject the hypothesis of constant wind-induced stress levels: (2) suppor
t the view that size-dependent changes in stem taper are required maintain
wind-load mechanical reliability; and (3) suggest that certain portions of
mature trees are 'designed' to fail under high winds speeds, thereby reduci
ng drag and the bending moments and stresses experienced by trunks.