INVESTIGATION ON THE COMPONENTS AND THE FORMATION OF A TRIBOCHEMICAL FILM IN THE SI3N4 GRAY IRON SLIDING PAIR LUBRICATED WITH DISTILLED WATER

A tribofilm was formed during wear tests of a Si3N4-gray iron pair lub ricated with distilled water. In order to clarify the formation proces s of the film, wear tests of the Si3N4-gray iron pair with different s liding distances were carried out on a ring-block tester using distill ed water as lubricant. After the tests, the worn surfaces of the gray iron specimens were examined under SEM. Furthermore, the components an d the structure of the film were analysed by AES, XPS, FTIR and XRD. C ombining the obtained results, the following aspects are obtained. Dur ing the wear tests of a Si3N4-gray iron pair lubricated with distilled water, oxidation and hydrolysis of Si3N4 occur on the wearing surface s, and the reaction product may be adsorbed by graphite flakes in the iron. As a result, a tribochemical film with a certain thickness and a rea, which consists of silicagel and graphite, is formed on the wearin g surface. The film protects both Si3N4 and gray iron and makes the pa ired surfaces smooth. Therefore, the friction coefficient of the pair is lowered down to as low as 0.02, and the total wear rates of Si3N4 a nd iron are near zero. However, because the products of oxidation and hydrolysis of Si3N4 cannot be accumulated on the wearing surface of ca rbon steel to form an effective tribofilm, both the friction coefficie nt and the wear rate of the Si3N4-carbon steel pair lubricated with di stilled water are high. (C) 1997 Elsevier Science S.A.