Microstructure and mechanical properties of friction welds of an alpha+beta titanium alloy

Citation
T. Mohandas et al., Microstructure and mechanical properties of friction welds of an alpha+beta titanium alloy, MAT SCI E A, 289(1-2), 2000, pp. 70-82
Citations number
27
Categorie Soggetti
Apllied Physucs/Condensed Matter/Materiales Science","Material Science & Engineering
Journal title
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN journal
09215093 → ACNP
Volume
289
Issue
1-2
Year of publication
2000
Pages
70 - 82
Database
ISI
SICI code
0921-5093(20000930)289:1-2<70:MAMPOF>2.0.ZU;2-Y
Abstract
The mechanical properties of friction welds of an alpha + beta titanium all oy (Ti-6.5Al-1.9Zr-3.3Mo-0.25Si) were evaluated in the stress relieved and in the post weld heat treated (PWHT) conditions to understand the effect of post weld heat treatments on the microstructure and mechanical properties. Stress relieved welds exhibited mechanical properties comparable to the ba se metal except impact toughness. The impact toughness was similar to 65% o f the base metal. This was mainly due to a mixed microstructure of martensi te and thin alpha + beta. Post weld heat treatment at 700 degrees C that le d to beta precipitation together with silicides exhibited poor impact tough ness and trangranular fracture with shallow and under developed fine dimple s. A PWHT at 960 degrees C for 1 h followed by air cooling (AC) that led to the decomposition of alpha(1) to equilibrium alpha + beta and coarsening o f the transgranular alpha improved the toughness. This treatment improved a ll other properties. 960 degrees C/1 h/water quenching (WQ) PWHT reduced th e impact toughness and exhibited quasi cleavage fracture possibly due to al pha(1) microstructure. Prolonged soaking at 960 degrees C marginally reduce d the toughness. This is thought to be due to a lean distribution of alpha consequent to its coarsening and possible compostional differences between the alpha and beta phases that led to smooth and flat fracture in the trans granular locations. The smooth and flat fracture features were due to poor resistance of the microstructure to crack propagation. (C) 2000 Elsevier Sc ience S.A. All rights reserved.