Recent experiments have shown that properly designed high-amplitude, low ma
ss flux pulsed slot jets blowing normal to a jet's shear layer near the noz
zle can significantly alter the jet's development. In contrast to commonly
used tow-amplitude forcing, this strong excitation appears to overwhelm the
turbulence, having nearly the same effect at high and low Reynolds numbers
. It can, therefore, be studied in detail by direct numerical simulation. D
irect numerical simulations of Mach 0.9, Reynolds number 3.6 X 10(3) jets e
xhausting into quiescent fluid are conducted. Physically realistic slot jet
actuators are included in the simulation by adding localized body-force te
rms to the governing equations. Three cases are considered in detail: a bas
eline unforced case and two cases that are forced with flapping modes at St
rouhal numbers 0.2 and 0.4. (Sr=0.4 was found to be the most amplified freq
uency in the unforced case.) Forcing at either frequency causes the jet to
expand rapidly in the plane parallel with the actuators and to contract in
the plane perpendicular to the actuators, as observed experimentally. It is
found that the jet responds closer to the nozzle when forced at Sr = 0.4,
but forcing at Sr = 0.2 is more effective at spreading the jet farther down
stream. Several different measures of mixing (scalar dissipation, volume in
tegrals of jet fluid mixture fraction, and point measurements of mixture fr
action) are considered, and it is shown that by most, but not all, measures
forcing at Sr = 0.2 is the more effective of the two at mixing.