Deposition of TiC films by dual source dc magnetron sputtering

Citation
S. Inoue et al., Deposition of TiC films by dual source dc magnetron sputtering, VACUUM, 59(2-3), 2000, pp. 735-741
Citations number
12
Categorie Soggetti
Apllied Physucs/Condensed Matter/Materiales Science","Material Science & Engineering
Journal title
VACUUM
ISSN journal
0042207X → ACNP
Volume
59
Issue
2-3
Year of publication
2000
Pages
735 - 741
Database
ISI
SICI code
0042-207X(200011/12)59:2-3<735:DOTFBD>2.0.ZU;2-6
Abstract
Ti-C films have been deposited onto slide glasses using a sputtering appara tus having dual planar magnetron cathodes. Applied de power for both Ti and graphite target was varied independently between 0-200 W for depositing Ti -C films with various C/Ti ratios. The substrates were not intentionally he ated during deposition. The structure, composition and morphology of films were examined by XRD, AES and AFM. Carbon composition in the deposited Ti-C films increased with the power ratio of C/Ti as expected. However, the car bon concentration tends to be higher than designed from both deposition rat es. This phenomenon is remarkable at lower C/Ti power ratio. The sticking c oefficient of carbon atoms seemed to increase when Ti is cosputtered. The i nterplanar spacing of (0 0 2) Ti changed from 0.235 nm to 0.245 nm when C/T i power ratio increased up to 0.2. It was found that crystalline TIC films are grown when C/Ti power ratio is between 0.4 and 4. The films deposited a t 2 of C/Ti power ratio showed near-stoichiometric composition. (C) 2000 El sevier Science Ltd. All rights reserved.