Mechanical behaviour of ceramic oxygen ion-conducting membranes

In devices such as solid oxide fuel cells (SOFCs), oxygen separators and me mbrane reactors, the mechanical properties of the ceramic components are pa rticularly important for estimating reliability. Here we summarise some rec ent studies of the mechanical properties of oxygen ion-conducting ceramics for the applications mentioned. Young's modulus and Poisson's ratio of seve ral materials of interest for SOFCs have now been characterised; including the effects of temperature and porosity on these parameters. The biaxial fl exural strength and fracture toughness of tape-cast YSZ have been measured at room temperature and at a typical operating temperature of 900 degreesC. Fracture toughness decreases with increasing temperature; from 1.61+/-0.12 MPa m(0.5) at room temperature to 1.02+/-0.05 MPa m(0.5) at 900 degreesC. Flexural strength and fracture toughness were found to be quantitatively co nsistent with fracture being initiated at observed surface defects. YSZ has also been found to be susceptible to sub-critical crack growth. Many oxyge n-ion conducting ceramics suffer from a chemically induced stress when subj ected to a gradient in the thermodynamic activity of oxygen. Ceria and acce ptor-doped lanthanum chromite are given as typical examples. One strategy f or overcoming this problem in electrolytes is to laminate different materia ls. An example is given of CGO laminated with a thin layer of YSZ. The comb ined effects of improved microstructure and residual stress lead to the lam inated membranes having higher apparent strength than single layer CGO memb ranes by a factor of between 1.75 and 4.06. Electrode/electrolyte laminates have been observed to have some unexpected behaviour. (C) 2000 Published b y Elsevier Science B.V.