EFFECT OF PROCESS CONDITIONS ON OLEFIN SELECTIVITY DURING CONVENTIONAL AND SUPERCRITICAL FISCHER-TROPSCH SYNTHESIS

A precipitated iron catalyst (100 Fe/5 Cu/4.2 K/25 SiO2 on mass basis) was tested in a fixed-bed reactor under a variety of process conditio ns during conventional Fischer-Tropsch synthesis (FTS) and supercritic al Fischer-Tropsch synthesis (SFTS). In both modes of operation it was found that: total olefin content decreases whereas 2-olefin content i ncreases with either increase in conversion or H-2/CO molar feed ratio . Total olefin and 2-olefin selectivities were essentially independent of reaction temperature. The effect of conversion was more pronounced during conventional FTS. Comparison of olefin selectivities in the tw o modes of operation reveals that total olefin content is greater whil e the 2-olefin content is smaller during SFTS. Also, both the decrease in total olefin content and the increase in 2-olefin content with inc rease in carbon number (i.e. molecular weight of hydrocarbon products) was significantly less pronounced during SFTS in comparison to the co nventional FTS. The obtained results suggest that l-olefins, and to a smaller extent n-paraffins, are the primary products of FTS. Secondary reactions (isomerization, hydrogenation, and readsorption) of high mo lecular weight a-olefins occur to a smaller extent during SFTS, due to higher diffusivities and desorption rates of a-olefins in the supercr itical propane than in the liquid-filled catalyst pores (conventional FTS).