Polylactide stereocomplex crystallites as nucleating agents for isotactic polylactide

A nucleation efficiency scale for isotactic poly(L-lactide) (PLLA) was obta ined with self-nucleation and nonisothermal differential scanning calorimet ry experiments. The maximum nucleation efficiency occurred at the highest c oncentration of self-nucleating sites, and the minimum efficiency occurred in the absence of these sites (pure PLLA polymer melt). Blends of PLLA and isotactic poly(D-lactide) (PDLA) led to the formation of a 1/1 stereocomple x. In comparison with the homopolymer (PLLA), the stereocomplex had a highe r melting temperature and crystallized at higher temperatures from the melt . Small stereocomplex crystallites were formed in PLLA/PDLA blends containi ng low concentrations of PDLA. These crystallites acted as heterogeneous nu cleation sites for subsequent PLLA crystallization. Using the PLLA nucleati on efficiency scale, we evaluated a series of PLLA/PDLA blends (0.25-15 wt % PDLA). A maximum nucleation efficiency of 66% was observed at 15 wt % PDL A. The nucleation efficiency was largely dependent on the thermal treatment of the sample. The nucleating ability of the stereocomplex was most effici ent when it was formed well before PLLA crystallization. According to the e fficiency scale, the stereocomplex was far superior to talc, a common nucle ating agent for PLLA, in its ability to enhance the rate of PLLA crystalliz ation. In comparison with the PLLA homopolymer, the addition of PDLA led to reduced spherulite sizes and a reduction in the overall extent of PLLA cry stallization. The decreased extent of crystallization was attributed to the hindered mobility of the PLLA chains due to tethering by the stereocomplex . (C) 2000 John Wiley & Sons, Inc.