Microstructure and secondary phases in coevaporated CuInS2 films: Dependence on growth temperature and chemical composition

The microstructure of CuInS2(CIS2) polycrystalline firms deposited onto Mo- coated glass has been analyzed by Raman scattering, Auger electron spectros copy (AES),transmission electron microscopy, and x-ray diffraction techniqu es. Samples were obtained by a coevaporation procedure that allows differen t Cu-to-In composition ratios (from Cu-rich to Cu-poor films). Films were g rown at different temperatures between 370 and 520 degreesC. The combinatio n of micro-Raman and AES techniques onto Ar+-sputtered samples has allowed us to identify the main secondary phases from Cu-poor films such as CuIn5S8 (at the central region of the layer) and MoS2 (at the CIS2/Mo interface). For Cu-rich films, secondary phases are CuS at the surface of as-grown laye rs and MoS2 at the CIS2/Mo interface. The lower intensity of the MoS2 modes from the Raman spectra measured at these samples suggests excess Cu to inh ibit MoS2 interface formation. Decreasing the temperature of deposition to 420 degreesC leads to an inhibition in observing these secondary phases. Th is inhibition is also accompanied by a significant broadening and blueshift of the main A(1) Raman mode from CIS2, as well as by an increase in the co ntribution of an additional mode at about 305 cm(-1). The experimental data suggest that these effects are related to a decrease in structural quality of the CIS2 films obtained under low-temperature deposition conditions, wh ich are likely connected to the inhibition in the measured spectra of secon dary-phase vibrational modes. (C) 2001 American Vacuum Society.