Synthesis and properties of TiO2 thin films by plasma source ion implantation

Authors
Citation
K. Baba et R. Hatada, Synthesis and properties of TiO2 thin films by plasma source ion implantation, SURF COAT, 136(1-3), 2001, pp. 241-243
Citations number
8
Categorie Soggetti
Material Science & Engineering
Journal title
SURFACE & COATINGS TECHNOLOGY
ISSN journal
02578972 → ACNP
Volume
136
Issue
1-3
Year of publication
2001
Pages
241 - 243
Database
ISI
SICI code
0257-8972(20010202)136:1-3<241:SAPOTT>2.0.ZU;2-E
Abstract
Plasma source ion implantation was used to prepare anatase type photocataly tic TiO2 films on silicon wafer and quartz glass from titanium tetraisoprop oxide as a precursor. RF power was used to produce a glow discharge plasma. High negative voltage pulses of -20 kV, repetition rate 100 Hz and 1 kHz w ere applied to the substrate holder to accelerate ions from the plasma. Aft er the deposition, the films were annealed for 1 h in air at a constant tem perature from 673 to 1023 K. The films were analyzed by XRD, XPS and Raman spectroscopy. The photocatalytic property of TiO2 films was evaluated by ex amining the decomposition of an aqueous solution of methylene blue under UV irradiation. XPS and Raman results showed that the deposited films consist ed of Ti, O and C and an amorphous carbon structure. The color of the films changed from black to colorless and transparent after annealing at a tempe rature above 723 K. XPS results showed that the composition of the films an nealed at 873 K was stoichiometric TiO2. The formation of a single phase an atase type TiO2 crystalline was confirmed for the films annealed between 72 3 and 923 K by XRD and Raman measurements. The films annealed at 973 K were a mixture of anatase and rutile type crystals. The film annealed at 973 K had the highest photocatalytic activity for the decomposition of aqueous so lution of methylene blue. (C) 2001 Elsevier Science B.V. All rights reserve d.