Fabrication of TiN thin film by shadow-masked pulsed laser deposition

A shadow-masked pulsed laser deposition (SPLD) technique has been used to f abricate TiN thin film on a silicon substrate. By interposing a chosen mask of the appropriate size and location between the laser-induced plasma plum e and the substrate, it was possible to vary the quality and smoothness of the resultant film. While all the films produced by shadow-masking represen t a marked improvement over the conventional pulsed laser deposition (PLD) technique, it was also observed that the masking caused a considerable redu ction in the deposition rate. The nearer the shadow mask was to the substra te the greater the film quality produced but the lesser the deposition rate . From X-ray diffraction analyses of the thin films it was found that an im portant reason for the surface defects of those films produced by the unmas ked PLD method was the existence of multiple orientations of the different crystal domains. The SPLD technique reduced the occurrence of such multiple orientations and improved crystal alignment direction by preventing lumpy clusters originating from the laser ablation from reaching the substrate. ( C) 2001 Elsevier Science B.V. All rights reserved.