Influence of the silica content on theological behaviour and cure characteristics of silica-filled styrene-butadiene rubber compounds

Rheological behaviour and cure characteristics of silica-filled styrene-but adiene rubber (SBR) compounds and SBR compounds filled with both silica and carbon black with different silica contents were investigated. Rheocurves of the time versus the torque of the compounds showed specific trends with the silica content. For the compounds with low silica content (less than 50 phr), the torque decreased immediately after the steep increase at the init ial point of the rheocurve and then increased very slowly. For the compound s with high silica content (more than 50phr), the rheographs showed two min imum torque points; the torque decreased immediately after the steep increa se at the start point of the rheocurve and then increased sharply before re aching the second minimum point. This can be explained by the strong filler -filler interaction of silica. The minimum torque of the compound increased slightly with an increase of the silica content up to 50phr silica content and then increased appreciably. For the silica-filled compounds, cure time s of the t(02), t(40), and t(90) became shorter with an increase of the fil ler content. For the compounds filled with both silica and carbon black (to tal filler content of 80phr), the cure times became longer with an increase of the silica content ratio. (C) 2001 Society of Chemical Industry.