Mn. Charalambides et al., The analysis of the frictional effect on stress-strain data from uniaxial compression of cheese, J MATER SCI, 36(9), 2001, pp. 2313-2321
Uniaxial compression tests were performed on Gruyere and Mozzarella cheeses
. It was observed that shorter samples appeared stiffer when no lubrication
was used. This dependence on sample height was eliminated when a synthetic
grease lubricant with polytetrafluorethylene (PTFE) was used. Therefore, t
he true stress-strain curves, i.e. free of frictional effects, were determi
ned. Methods for reproducing these curves using data from unlubricated test
s were then sought. It was shown that the true stress-strain curves can be
determined by testing samples of increasing heights until the difference be
tween consecutive curves is negligible. The curve corresponding to the tall
est sample can then be taken to represent the true stress-strain curve. If
size or shape limitations do not allow testing of sufficiently tall samples
, quadratic extrapolation of the results may be performed. Alternatively, a
n iterative finite element analysis could be used. The latter is a more acc
urate but more time consuming method than the extrapolation procedure. In a
ddition it requires that the coefficient of friction, mu, is known. It was
shown that the latter can be derived from an analytical scheme. These value
s of mu were approximately 0.1 for Gruyere and 0.3 for Mozzarella and they
were in close agreement with numerical predictions. (C) 2001 Kluwer Academi
c Publishers.