C. Trolliet et al., Influence of the nature and porosity of different supports on the acidic and catalytic properties of H3PW12O40, TOP CATAL, 15(1), 2001, pp. 73-81
In order to obtain highly dispersed heteropolyacid (HPA) species, H3PW12O40
was supported on various supports exhibiting different porosities and surf
ace chemical properties. Amorphous and monoclinic amphoteric zirconias, act
ivated montmorillonite (AC) and hexagonal silica (HMS) were chosen as suppo
rts. It was observed that the zirconia support partly decomposed HPA at low
coverage, giving the lacunary anion PW11O397- due to the reaction with bas
ic hydroxyl groups, whereas montmorillonite and HMS did not. Catalytic prop
erties for n-butane to isobutane isomerisation at 473 K and propan-2-ol dec
omposition at 353 K were compared for all samples as a function of HPA load
ings and compared to data already published on bulk H3PW12O40 and Cs1.9H1.1
PW12O40 samples. It was found for HPA/AC samples that, although their activ
ity for propan-2-ol de composition varied linearly with HPA loading, their
activity for ii-butane isomerisation was very weak, which indicates a weake
r acid strength by supporting the HPA. This is probably due to the exchange
of protons from the HPA by the exchangeable cations of the montmorillonite
, the new protons associated with the clay being much less acidic. It also
appeared, when comparing with catalytic data already published on for HPA/H
MS, that HMS was the best support for HPA without modifying appreciably its
catalytic and thus their acid properties, the HPA being certainly bonded t
o the HMS walls by hydrogen bonding. Assuming a diameter of 1.2 nm for each
Keggin anion, the turnover frequency (TOF) values for n-butane isomerisati
on at 473 K were calculated per surface Keggin species for HPA/HMS, bulk H3
PW12O40 and Cs1.9H1.1PW12O40, and were found to be equal to 155, 113 and 10
0 x 10(-5) s(-1) respectively, and thus to be very close, showing that the
acid strength of the three samples was comparable. It was found to equal on
ly 3.4 x 10(-5) s(-1) for the HPA/AC sample, in agreement with a weaker aci
d strength. At last, mesoporosity of the support was found to favour n-buta
ne isomerisation reaction.