Chemical synthesis and electrochemical properties of poly(cyano-substituted-diheteroareneethylene) as conducting polymers for electrochemical supercapacitors
P. Soudan et al., Chemical synthesis and electrochemical properties of poly(cyano-substituted-diheteroareneethylene) as conducting polymers for electrochemical supercapacitors, J ELCHEM SO, 148(7), 2001, pp. A775-A782
Polymers derived from diheteroaryl-(cyanovinylene), synthesized by chemical
polymerization of the monomers in the presence of 6 equivalents of FeCl3 i
n chloroform, were characterized by elemental analysis, energy-dispersive a
nalysis by X-ray, and X-ray photoelectron spectroscopy. The electrochemical
performances of composite electrodes prepared from chlorinated poly-(E)-al
pha-[(2-thienyl)methylene]-2-thiopheneacetonitrile(poly-1), poly-(E)-alpha-
[(3-methyl-2-thienyl)methylene]-2-thiopheneacetonitrile (poly-2). and poly-
(E)-alpha-[(2-furanyl)methylene]-2-thiopheneacetonitrile (poly-3), with ace
tylene black (A.B., 45 wt %) and polytetrafluoroethylene (5 wt %) have been
investigated in 1 M Et4NBF4/acetonitrile using cyclic voltammetry, electro
chemical impedance spectroscopy, and galvanostatic charge/discharge cycling
. The effect of the structure of the polymers on their electrochemical prop
erties is in good agreement with anticipated effects for methyl and furan g
roups. The results indicated p- and n-doping levels up to 0.3 electrons per
heterocycle for the three polymers. These values make those polymers inter
esting candidates for use in electrochemical supercapacitors in which speci
fic capacity and energy of about 30 Ah/kg and 55 Wh/kg of polymer may be ac
hieved. The best cyclability was demonstrated with poly-1 and poly-2, in pa
rticular during cycling in their n-doping state with a doping level of 0.16
and 0.17 electrons per thiophene unit, respectively, maintained after 1000
cycles. preliminary charge/ discharge galvanostatic cycling with a poly-1-
based supercapacitor yielded specific energy and power of 42 Wh/kg and 11 k
W/kg of polymer, respectively, during the first 60 cycles and 30 Wh/kg and
9 kW/kg after 1800 cycles, for a discharge time of about 10 s. Moreover. cy
cling experiments performed separately on negative and positive electrodes
have shown that the capacity loss is associated essentially with the n-dopi
ng process at the negative electrode. (C) 2001 The Electrochemical Society.