The effect of mercury on the fatigue behavior of 316 LN stainless steel

Design of the mercury target system components for the Spallation Neutron S ource (SNS) requires data on high- and low-cycle fatigue behavior, and the program in progress includes determining the effects of mercury on the fati gue behavior of type 316 LN stainless steel, the primary material of choice for the target vessel. Uniaxial, load-controlled fatigue tests with R = -1 and (minimum stress/maximum stress) have been conducted in air and mercury at room temperature employing constant amplitude, sinusoidal loading at fr equencies from 0.1 to 700 Hz. Stress amplitude versus fatigue life (S-N cur ves) data at 10 Hz for both air and mercury show a sharp knee at approximat ely 1 million cycles indicating a fatigue endurance limit in either air or mercury around 240 Mpa. Mean stress (R = 0.1) lowers the endurance limit to 160 MPa. At relatively low frequency, both frequency and environment (merc ury) had some impact on fatigue life of type 316 LN stainless steel at high -stress levels (i.e., stresses considerably above the apparent fatigue limi t). Although testing at a high frequency of 700 Hz, showed a decrease in fa tigue life in air compared with that at 10 Hz, a significant increase in sp ecimen temperature was observed in air due to self-heating. No pronounced e ffects of waveform have yet been found, but data are limited. (C) 2001 Else vier Science B.V. All rights reserved.