The preparation of V2O5/TiO2 catalyst supported on the ceramic filter candle for selective reduction of NO

In order to prepare the catalytic filters based on V2O5/TiO2 for the remova l of NOx and particulate simultaneously from the flue gas stream, the exper imental study was carried out. The effective method to support TiO2 layer i n the pore of the commercial ceramic filter element was developed. TiO2 lay er was supported on the filter element by three methods; impregnation with Ti solution, sol-gel dip coating and sol-gel centrifugal coating. As the mo del test to check the catalytic activity, NO reduction in the oxidizing str eam was investigated. The catalytic filter prepared by applying the centrif ugal force showed the best NO conversion more than 90% when the face veloci ty was 0.02 m/sec. This was a very promising result for the application of catalytic filter for the flue gas control at high temperature. The supporti ng methods by the impregnation and dip coating were not recommended because the TiO2 layer was concentrated in the exterior layer of the filter elemen t.