Vv. Uglov et al., Plasma immersion N and N+C implantation into high-speed tool steel: surface morphology, phase composition and mechanical properties, SURF COAT, 142, 2001, pp. 406-411
The effect of plasma immersion N and N + C implantation at elevated tempera
tures (380 degreesC and 500 degreesC) on microstructure, element and phase
composition, microhardness and tribological properties of high-speed tool s
teel (HSS) has been studied. It has been established that under plasma imme
rsion ion implantation (PIII) of nitrogen (8 x 10(18) ions/cm(2), 380 degre
esC the microhardness of steel surface layers increases by a factor of 2.5
and the friction coefficient decreases by a factor of 2. By methods of Auge
r electron spectrometry (AES), energy dispersive X-ray analysis (EDX), glan
cing X-ray diffraction (GXRD) and scanning electron microscopy (SEM) it is
shown that transformations of near-surface layers are associated with: the
formation of strained epsilon-(Fe,M)(2+x)N; nitrogen doping of M6C carbide;
the formation highly defective regions (channels and/or pores) predominant
ly localized near carbide precipitates in near-surface layers (up to 10 mum
); the considerable increase of concentration of tiny (up to 0.2 mum) carbi
de phases doped with nitrogen; the formation of less modified deep layers i
n the case of N + C as compared to N PIII; the significant selective sputte
ring of martensite at 500 degreesC. (C) 2001 Elsevier Science B.V. All righ
ts reserved.