Growth and structure of Ni films radio frequency sputter deposited on GaAs(001) covered with Ti film

Citation
K. Makihara et al., Growth and structure of Ni films radio frequency sputter deposited on GaAs(001) covered with Ti film, J VAC SCI A, 19(5), 2001, pp. 2494-2498
Citations number
7
Categorie Soggetti
Apllied Physucs/Condensed Matter/Materiales Science","Material Science & Engineering
Journal title
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS
ISSN journal
07342101 → ACNP
Volume
19
Issue
5
Year of publication
2001
Pages
2494 - 2498
Database
ISI
SICI code
0734-2101(200109/10)19:5<2494:GASONF>2.0.ZU;2-K
Abstract
A study is made of the growth mode of Ni films on the GaAs(001) substrates at 300 degreesC by rf magnetron sputtering. To restrain chemical reaction a t the Ni/GaAs interface Ti films thinner than 700 nm are inserted into the interface. Thin film x-ray diffraction as well as normal x-ray diffraction, cross sectional transmission electron microscopy, and atomic force microsc opy are used to characterize the structure of the Ni/Ti/GaAs(001) system. E lectrical properties are studied by measuring resistivity and its temperatu re coefficient at temperature lower than 300 K. Growth structure of Ti film s depends on substrate temperature. The 00.1-textured growth without compou nd formation is completed optimally at 300 degreesC. The, films consist of columnar grains 100-200 nm in diameter. The columnar growth of the Ti film is perfectly succeeded by the Ni film with the growth mode of Ni(111)//Ti(0 0.1)//GaAs(001) and Ti(11.0)//GaAs(110) where Ni(001) is nearly parallel to GaAs(111). No solid reaction between Ni, Ti, and GaAs is detected. Without the Ti interlayer the Ni film is depleted by formation of the compound NiA S(2), resulting in an abrupt decrease of temperature coefficient of resisti vity. In conclusion, it is confirmed that the crystallographically well ori entated Ni film can grow on the GaAs(001) through the Ti interlayer without any compound formation at the interfaces. (C) 2001 American Vacuum Society .