Topographical nanostructure patterning on the surface of a thin film of polyurethane containing azobenzene moiety using the optical near field aroundpolystyrene spheres
M. Hasegawa et al., Topographical nanostructure patterning on the surface of a thin film of polyurethane containing azobenzene moiety using the optical near field aroundpolystyrene spheres, MACROMOLEC, 34(21), 2001, pp. 7471-7476
An indented nanostructure was formed on the surface of azobenzene-functiona
lized polyurethane thin films by the induced migration of polymer chains us
ing the optical near field generated around polystyrene (PS) spheres. The P
S spheres, which had a diameter ranging from 98 to 990 nm, were arranged on
the surface of a photoresponsive polymer film using a self, organization p
rocess, and the films were then exposed to a linearly polarized Ar+ laser a
t 488 nm. A hexagonal array of indentations reflecting the original geometr
y and arrangement of the spheres was observed on the polyurethane surface b
y atomic force microscopy. The indented structure that was formed had a res
olution of similar to 95 nm. This structure was stable at room temperature
and could be erased by heating the films above their glass transition tempe
rature (T,). The modification depth and diameter of the dents formed depend
ed on the size of the original PS spheres. In particular, deeper dents were
formed by using PS spheres with a diameter of over 505 nm, due to the opti
cal lens effect they created, and the irradiation onto spheres of greater t
han 505 nm diameter with linearly polarized light induced an anisotropic mo
dification on the surface of the polymer films. The thickness of the polyme
r film significantly affected the modification depth of the dent. We prepar
ed three different kinds of photoresponsive polyurethane, each containing a
slightly different azobenzene moiety. Although these polymers all had virt
ually the same molecular weight, Tg, and absorptivity at the wavelength of
the irradiated light, the modified depth of the dent observed for each of t
he films was very different. Furthermore, a dependence between the irradiat
ed light intensity and the size of dent achievable was observed, which was
due to the difference in the trans-cis-trans isomerization behavior of the
azobenzene moiety.